News

Company News

Trade News

02

2024-02

Comparative examples of energy consumption and calcination costs between gas kilns and high-temperature electric furnaces

Compared with gas kilns, high-temperature electric furnaces have the following advantages: 1. Simple operation and high degree of automation. 2. Large loading capacity. 3. The calcination cycle is short. 4. The calcination quality of the product is stable. 5. Save labor costs. 6. Save environmental costs.

2024-02-02

Comparative examples of energy consumption and calcination costs between gas kilns and high-temperature electric furnaces

02

2024-02

The tunnel type 1750 ℃ high-temperature electric furnace developed by our company has been put into use, with significant energy-saving effects

137/10000 立即翻译 137/10000立即翻译划译我公司设计建造的隧道式1750℃高温电炉已在巩义市投入使用。隧道式电炉长度为38m，炉段有效尺寸为：宽500mm，高600mm。设计总功率为450KW，实际使用总功率为300-320KW。主要用于烧结氧化铝空心球产品，实际使用温度在1680~1730℃之间。 划译 The tunnel type 1750 ℃ high-temperature electric furnace designed and constructed by our company has been put into use in Gongyi City. The length of the tunnel type electric furnace is 38m, and the effective dimensions of the furnace section are: width 500mm, height 600mm. The designed total power is 450KW, and the actual total power used is 300-320KW. Mainly used for sintering alumina hollow ball products, the actual usage temperature is between 1680~1730 ℃.

2024-02-02

The tunnel type 1750 ℃ high-temperature electric furnace developed by our company has been put into use, with significant energy-saving effects

02

2024-02

Improvement of old electric furnaces, achieving good energy-saving effects

However, as a key equipment for high-temperature products, the main requirements for the use of industrial electric furnaces are as follows: 1) Temperature requirements: the ability to achieve operating temperature, temperature control accuracy, furnace temperature difference, etc. 2) Operation requirements: Easy to operate and high level of intelligence. 3) Reliability requirements: Ensure that various components of the electric furnace, such as the heating element, lining, and control system, do not frequently malfunction under normal operating conditions. 4) Energy consumption requirements: Take various measures to reduce energy consumption. Only by achieving low energy consumption of electric furnaces can the success of industrial electric furnaces replacing gas kilns be achieved.

2024-02-02

Improvement of old electric furnaces, achieving good energy-saving effects

26

2022-04

Introduction of functional characteristics and detailed parameters of mullite moving board

Corundum mullite moving plate (push plate), corundum mullite saggar, corundum mullite corrugated plate, corundum mullite pillar and other kiln furniture, the content of alumina is more than 90%, and the main crystal phase is corundum The refractory products have high normal temperature compressive strength (up to 340MPa),

2022-04-26

26

2022-04

Basic introduction of silicon carbide furnace tube

Silicon carbide, commonly known as emery, also known as moissanite, is a typical covalent bond compound that hardly exists in nature. Silicon carbide furnace tubes are made of this material. In 1890, Eword and G. Acheson prepared silicon carbide when they wanted to synthesize diamond by adding silicon to carbon as a catalyst. With high hardness, wear resistance, oxidation resistance and other characteristics, it is widely used in aviation, machinery, automobile, metallurgy, chemical industry, electronics and other fields. According to the firing process, silicon carbide can be divided into recrystallized silicon carbide ceramics, reactive sintered silicon carbide ceramics, pressureless sintered silicon carbide ceramics, hot-pressed sintered silicon carbide ceramics, high-temperature hot isostatic pressing sintered silicon carbide ceramics, and chemical vapor deposition carbonization silicon. The properties of silicon carbide prepared by various processes are quite different, so various processes can be used to manufacture silicon carbide ceramics with different properties to meet various needs.

2022-04-26

26

2022-04

What is the thermal conductivity of alumina ceramics, the higher the better, how to test?

Alumina ceramics is a ceramic material with alumina (Al2O3) as the main body, which is used in thick film integrated circuits. Alumina ceramics have good conductivity,

2022-04-26

< 123 >